Flyscreen repair and replacement cost in Australia

What remeshing, new flyscreens and screen doors cost in Australia, from published price lists, plus how to decide whether to repair or replace.

Torn, sagging window flyscreen beside a new flyscreen with tight mesh, both leaning against a brick wall

Remeshing a window flyscreen costs about $25 to $80 per screen from a screen business, and a sliding flyscreen door about $100 to $200. A brand new made-to-measure window screen, supplied and fitted, is usually about $90 to $180, and a new sliding flyscreen door about $250 to $650. These are indicative ranges from published price lists checked in November 2026.

If the frame is straight and the corners are tight, remesh it. If the frame is bent, cracked or missing parts, replacing it is usually the better spend. For a figure based on your own screens, try the cost calculator.

Flyscreen costs at a glance

Prices below come from published price lists and price guides on the websites of screen businesses and suppliers in NSW, Victoria, Queensland and WA, plus Bunnings product pages, all checked in November 2026. Most businesses quote “from” prices, so treat the top of each range as common rather than a ceiling.

Job Indicative price (AUD) Notes
Remesh a window screen about $25 to $80 each Lowest prices usually need several screens in one visit
Set-up or call-out on a small job up to about $120 Many businesses do not publish this; ask
Remesh a sliding flyscreen door about $100 to $200 Second and later doors often cost less
Pet mesh upgrade on new screens about $50 to $140 extra per screen Varies by business and screen size
New window flyscreen, made to measure and fitted about $90 to $180 each Small sliding window screens from about $40; one-off single screens can cost far more
DIY made-to-measure window screen kit about $57 to $92 Delivered flat or assembled, you fit it
New sliding flyscreen door, fitted about $250 to $650 Size, colour and tracks change the price
New hinged flyscreen door, fitted about $300 to $650 Non-standard sizes and colours cost more
DIY remesh materials, one window about $25 Fibreglass mesh plus spline, tools extra

Some businesses quote including GST and some quote plus GST, so check which you are looking at before comparing.

What remeshing costs

Remeshing means keeping the frame and replacing the mesh and the rubber spline that holds it in the channel. It is the most common flyscreen job and the cheapest.

Two published examples show the spread:

  • A Melbourne business, Danny’s Home Services, lists window flyscreens remeshed from $25 each, with a minimum of four screens, and doors from $99.
  • A handyman on Sydney’s Northern Beaches, Handy Work, says a small to average window remesh starts at around $70, with about $120 extra for set-up and call-out if the job is small. It puts a first sliding screen door at $130 to $200, and further doors at $110 to $130 each.

That gap is mostly about volume and travel. A repairer who has to drive out, set up a bench and do one screen has to cover that visit somehow, either with a call-out fee or a higher price for the first screen.

Screen repairer seen from behind rolling spline into a window screen frame on a driveway bench, old screens waiting

Larger screens cost more. A Perth business publishes its window mesh and frame repairs from $73 per square metre plus GST, so a big screen is priced on its area rather than as one flat rate.

Sliding door remeshing

A sliding flyscreen door has a lot more mesh than a window, and it often needs new rollers or a straightened frame at the same time. Published remesh prices run from about $100 to $200 for a standard door. If the door also drags or jumps the track, the rollers add to the bill; see our guide to sliding flyscreen door repair.

What new flyscreens cost

When the frame is past saving, you need a new made-to-measure screen. Prices for a fitted window screen from businesses that publish them:

  • Starline Security in Brisbane gives about $40 to $150 for a screen on a standard sliding window and about $80 to $180 for a double hung window. Awning windows cost more because of brackets for the winder, and old-style louvre windows can run to several hundred dollars because they usually need a build-out frame.
  • A Gold Coast screen business listed window screens from $93 in January 2026.
  • A business covering Queensland, NSW and Canberra gives about $160 for a 900mm by 1200mm window screen, with installation labour added on top.
  • Sydney Fly Screens charges $130 each (including GST) for six or more windows, or when ordered with a door, but $350 for a single window on its own.

That last example is the clearest lesson in this guide: the per-screen price drops sharply when you order several. If a few screens are tired, get them all quoted together.

Doing it yourself with a made-to-measure kit

Some suppliers cut the frame and mesh to your measurements and post it out for you to assemble and fit. A Sydney supplier’s made-to-measure aluminium window screens were listed at about $57 to $92 depending on size, and another listed an extra large kit (pickup only) for $67.50. Delivery and add-ons such as mid braces or clips are extra. Measure carefully, because a screen cut too small cannot be fixed.

Screen doors

New sliding flyscreen doors, supplied and fitted, ran from about $250 to $350 for a standard door at one Brisbane business, from $430 at a Gold Coast business, and $650 at a Sydney business. Hinged flyscreen doors were about $300 for a standard size at the Brisbane business, around $450 for odd sizes or colours, and $650 at the Sydney business. Security screen doors are a different product and cost a lot more; see flyscreen doors compared.

What pushes the price up

  • Mesh type. Pet mesh, midge mesh and stainless or aluminium mesh all cost more than standard fibreglass. One business adds about $70 for pet mesh and about $30 for midge mesh on a new screen. The mesh types guide explains which is worth paying for.
  • Size. Big windows and doors use more mesh and take longer.
  • Frame damage. A bent frame or broken corner adds labour, and past a point the business will tell you to replace it.
  • Access. Screens on upper floors, or ones that need to be unscrewed from security frames, take longer.
  • Small jobs. One screen on its own carries the whole cost of the visit.
  • Odd window types. Louvre, awning and casement windows often need brackets or special screens.

DIY: what materials cost

Remeshing a standard window yourself is the cheapest option by a long way. At Bunnings in November 2026, a 1220mm by 2m piece of Cyclone fibreglass flyscreen was about $16 and a 13m pack of 6mm spline about $9. That is enough for at least one standard window. The same size piece of pet mesh was about $35.

You also need a spline roller and a sharp knife, which you buy once. Our step-by-step guide to replacing flyscreen mesh shows how. Take care with the blade, and with aluminium mesh, which has sharp cut edges.

Repair or replace: how to decide

Remesh when:

  • the frame is straight when you lay it flat on the floor
  • the corners are tight and the corner joiners are not cracked
  • the screen still fits the window snugly

Replace when:

  • the frame is bent, twisted or kinked
  • a corner has split or the joiners are broken or missing
  • the screen never fitted properly, or you are changing to a different type of screen
  • the remesh plus frame repairs would cost close to a new screen anyway

Two flyscreen frames on a garage floor: a straight frame with a hole torn in the mesh, and a bent frame with sagging mesh

A slightly bent frame can often be straightened and remeshed for a bit extra. A badly damaged one usually cannot.

When to get someone in

Get a professional if the screens are on an upper floor and you would need a ladder to reach them, if the frame needs straightening or new corners, if it is a sliding door with worn rollers, or if there are lots of screens and your time is worth more than the saving. Security screens should also go to a specialist, because the mesh is fixed differently and changing it may affect the standard the screen was tested to, so ask the manufacturer or installer first.

When you ask for quotes, give the number of screens, rough sizes, the mesh you want and whether any frames are damaged. Ask whether the price includes GST and any call-out fee. You can request a quote through us, or find a local screen business near you.

Questions

How much does it cost to remesh one flyscreen?

Published prices from screen businesses we checked in November 2026 put a standard window remesh at about $25 to $80. A single screen on its own often costs more, because some repairers add a set-up or call-out charge (one Sydney business suggests adding about $120 for set-up and call-out on a small job).

Is it cheaper to remesh or replace a flyscreen?

Remeshing is usually much cheaper if the frame is straight and the corners are sound. A new made-to-measure window screen, supplied and fitted, generally costs about $90 to $180, compared with roughly $25 to $80 for a remesh.

How much extra is pet mesh?

On new screens, the businesses we checked add about $50 to $140 per screen for pet mesh. For DIY, a 1220mm by 2m piece of pet mesh at Bunnings cost about $35 in November 2026, against about $16 for standard fibreglass.

Why do quotes vary so much?

Screen size, mesh type, frame condition, access (upper floors cost more), travel distance and how many screens are done in one visit all change the price. Many businesses charge noticeably less per screen when you do the whole house at once.

Find a flyscreen repairer near you

Prefer someone else to do it? Search your suburb, or send a free quote request.